HOW TO SHOOT MILKY WAY & WHAT GEAR YOU NEED
LIGHT POLLUTION MAP:
Check out a Light pollution map before you pick your dark sky location where the Milky Way is visible.
CAMERA:
You will need a camera to control your ISO, shutter speed, and aperture manually.
LENS:
A fast, wide-angle lens of 1.4 – 2.8 is ideal. If you use a 3.5 or higher (slower lens), you must increase the ISO. The higher the ISO, the more grain or digital noise or grain in your photos.
TRIPOD:
A good, sturdy tripod is essential for night photography. If it gets windy, you will need a sturdy one. Remember that when you buy one, it should be sturdy enough to withstand the wind but small enough to fit in your suitcase.
SKY-MAP:
Sky Guide is available through the iTunes Store for $1.99. It has a 5 out of 5-star rating on both the current (3.2) version (1200+ ratings) and all previous versions (8600+ ratings).
FLASHLIGHT:
Our choice is Coast brand for flashlights. The ideal flashlight will have high lumens, and you can zoom in and out on the light emitting from the flashlight. Get the HP7, PX45, or the G50. Ideally, go with the HP7.
MOON PHAZE MAP:
The best time to go is during a new moon; you want to be in the darkest area possible. The week before the new moon, when the moon has not risen, is a perfect time to go, so check the moonrise chart to see when the moon will be up.
REMOTE SHUTTER RELEASE:
When painting with light and you want to go over a 30-second exposure, you must have a shutter release to use your bulb mode. You can use the remote release or your camera’s built-in two-second timer when exposing your pictures.
HOW TO FOCUS:
Use live view. Use your camera’s live view to focus in the dark, hit the zoom button, and focus on a bright star. You can also use the infinity setting on your lens but do several test shots to determine accuracy. It can be off a little on some lenses. You can also light it up with a flashlight, focus, then gently, without touching the focus ring, put the camera in manual focus so it will not search for the focus. You must do this each time you move your camera to take your next angel.
CAMERA SETTINGS
ISO:
Start with ISO 1600 – 3200. This is a common starting point, and you will adjust from here.
SHUTTER SPEED:
Remember, the earth is rotating. If you leave the shutter open for too long, you will see star trails that will not make for a crisp image. We want crisp, non-star trail images. Here is the formula to avoid star trails—the 500 rule – Divide 500 by the focal length of your lens. So, if you have a 24mm lens on a full-frame camera, you will set your shutter speed to 20 sec. (500/24 = 20.83). If you are using a crop sensor camera, first do the math of the crop sensor to find the focal length. Cannon is 1.6, and Nikon is 1.5. Convert to full-frame focal length, then use the formula. Nikon 18mm x 1.5= 27mm – 500/27 = 18.51 seconds.
APERTURE:
Depth of field isn’t critical in these shots, but letting light into the camera is; therefore, you should shoot wide open. If the depth of field is essential to you, try not to go too high. (Wide open =the lowest aperture your camera will allow.) You will have to increase the ISO some, which will cause digital noise.
WHITE BALANCE:
Use live view mode to change your white balance settings and see what they look like. You can also shoot in shade or cloud mode as a standard setting and adjust things later.
